 |
|
 |
Digital Lux Meter
Luxmeter measuring 0 to 50,000 lux over 3 measurement ranges.
Clear 4-digit LCD display. Separate sensor with diffusion
lens. Complete with protective holster.
Battery 9V, PP3 (not included)
Dimensions 109 x 72 x 24mm
Accuracy +/- 5%
Resolution 1 LUX
Overload Display 1
Order Code: ST600620 Price: £45.99
|
|
 |
Analogue Sound Level
Meter
This versatile meter will measure sound levels in just
about any environment. Ideal for factories, schools and airports
as well as domestic applications such as studios or home cinema
installations, etc. Powered by a 9V
PP3 battery (included) the unit is completely portable
and easy to use.
7 sound level ranges from 50db to 126 db
2 frequency weightings
Fast and slow response settings
Battery condition monitor
Phono output for connection to test equipment
Tripod bush
Order Code: ST952422 Price: £59.99
|
|
|
|
Component Analyser
Got a box of components you can't identitfy? Can't lay your
hands on the data sheet you need? Forgotten the pin-outs?
The Atlas is a new generation of intelligent component analyser
which brings a world of component data to your fingertips.
Just connect the three colour coded test leads and press the
button.
The Atlas features:
Automatic component identification of: Bipolar and Darlington
transistors, Enhancement and Depletion Mode MOSFETs, Junction
FETs Triacs and Thyristors, Standard and Bicolour LEDs, Diodes
and Diode networks.
Automatic pinout identification for all the above component
types.
Special feature identification such as diode protection and
resistor shunts.
Gain measurement for transistors.
Gate threshold measurement for Enhancement Mode MOSFETs.
Semiconductor forward voltage measurements for diodes, LEDs
and transistors.
Semiconductor test current measurement.
The Atlas analyser will save you hours of wasted time. Just
what the well equipped workshop needs.
Click here for user manual
(111k)
Order Code: TG0001 Price: £59.99
Replacement Battery for component analyser.
Order Code: BT0011 Price: £0.99
|
|
|
|
LCR Tester
The Atlas LCR is an advanced instrument that greatly simplifies
the testing of passive components. Traditional LCR bridges
are inherently complex and very time consuming to use. The
atlas LCR automatically identifies the type of conponent (Indicator,
Capacitor or Resistor) as well as it's value together with
further conponent data. Such as the DC resistance of an indicator.
Just clip the universal test leads to your conponent and press
the test button. It automatically selects the best signal
level and frequency for the test conponent. Ranges 1uH to
10H, 1pF to 10.000uF, 1R to 2MR. Basic accuracy is 1 %. Universal
test probes are detachable allowing use of many different
probe types including SMT tweezer probes.
Click here for information
sheet (586k)
Order Code: TG0002 Price: £79.00
|
|
Surface Mount Device Tweezers
Specifically for use with the Atlas LCR Passive Component
Analyser (TG0002) The gold tipped probes are ideal for testing
discrete, loose, surface mount devices from 0402 package sizes
and upwards. The probes are terminated with the Atkas LCR
plugs, allowing simple and rapid connection to the LCR. The
tweezers are supplied complete with a beautiful stainless
steel Peak Dog-Tag for probe compensation purposes. Full instructions
are included.
Order Code: TG0010 Price: £6.00
|
|
|
Crocodile Clip Set for LCR Tester
These crocodile clips have been specifically assembled for
use with the Atlas LCR Passive Component Analyser (TG0002).
The stainless plated crocs can be separated by up to 120mm.
The jaws of each clip can be opened to 6mm. The overall assembly
length is 95mm. The probes are terminated with gold plated
Atkas LCR Plugs, allowing for simple connection to your analyser.
Full instructions are provided.
Order Code: TG0008 Price: £9.00
|
|
|
Long reach Grabber Probes
These Grabbers are for use with the Atlas LCR Passive Component
Analyser (TG0002). The overall length is 58mm (2 1/4").
Each double-electrode grabber is capable of holding on to
any conductor diameter up to 1.8mm. The probes are designed
to mate with the LCR sockets. Full instructions are provided.
Order Code: TG0009 Price: £19.00
|
|
|
|
|
|
|
|
|
|
Atlas IT Network
Analyser
Comprehensive CAT 5/5e/6 network cable analyser. Just plug
in one end of your cable into the Atlas IT and the other into
the Active Terminator and press "Test". In seconds
the unit will identify the cable type (straight through, crossover
or token ring) and verify every conection. If ther are any
faults such as shorts, breaks or swapped lines then they are
clearly explained on screen. Socket testing is possible too
thanks to the special patch cables included in the outfit.
Swapped lines, missing lines, shorted lines are all uniquely
identified together with the full connection pattern! What's
more, if you want to know how to make up a special network
cable, the Atlas can instruct you, even down to the cable
colours! The Atlas IT is supplied in a robust carry case complete
with two Active Terminators and spare battery.
The Atlas features:
Automatic identification of Straight-Through patch cables.
Comprehensive identification of Cross-Over cables.
Analyses all 8 lines of the cable.
Fault identification and highlighting for the following faults:
Shorted lines, Open lines, Swapped lines.
Display of cable-making instructions when not testing cables.
Can test plug-plug, plug-socket and socket-socket.
Support for up to 150m (500ft) of cable.
Miniature Active Terminator, ideal for use in tight spaces.
Clear and user-friendly scrollable display.
2 Atlas Active Terminators and 2 batteries (1 spare) supplied.
Compatible with optional "ID Terminators".
Order Code: TG0004 Price: £89.00
|
|
|
|
Atlas IT Identified
Terminators
Using the new ID Terminators provides all the existing functions
of cable type identification and fault detection in addition
to cable-run identification. Now you can analyse and identify
lots of cables without needing to make lots of trips to swap
terminators. Sets of 8 unique ID Terminators are available.
Terminators 01-08
Order Code: TG0005 Price: £59.00
Terminators 09-19
Order Code: TG0006 Price: £Out of Stock
Terminators 17-24
Order Code: TG0007 Price: £59.00
|
|
|
|
Electronic
Digital Caliper In Plastic Storage Case
Measuring range 0-150mm and 0-6 inches with an accuracy of ±0.001".
Measurement readings can be switched from metric to imperial
(and vice-versa) at the touch of a button.
Order Code: TL9121 Price: £29.99
|
|
|
|
| MULTIMETERS |
|
|
|
Pocket Sized Digital Multitester
Compact, 3.5 digit multitester with 19 ranges and six functions,
including diode test and hFE test. DC volts 200mV - 1000V.
AC Volts 200V - 700V. DC current 200uA - 10A. Resistance 200R
- 2MR.
Order Code: ST600006 Price: £7.50
|
|
|
Digital Multimeter with audible continuity test
A pocket sized multimeter for the measurement of AC/DC
voltage, DC current, resistance, with diode and transistor
test, audible continuity and test signal output.
DC Volts: 200mV - 1000V (+/- 0.5%)
AC Volts: 200V - 750V (+/- 1.2%)
DC Current: 2000uA - 10A (+/- 1.0%)
Resistance: 200 Ohms - 2 MOhms (+/- 0.8%)
Order Code: ST600035 Price: £10.00
|
|
|
|
 |
Analogue Multitester
Good quality analogue multitester with 18 ranges and 5 functions
including continuity and battery test. Large, east to read
mirrored scale and LED for continuity test.
Order Code: ST600439 Price: £9.25
|
|
|
Digital Multitester
A compact, pocket sized DMM for the measurement
of AC / DC voltage, DC current, resistance, diode and
transistor test, audible continuity, test signal output
and temperature (°C).
DC voltage 200mV - 1000V
AC voltage 200V - 750V
DC current 2000µA - 10A
Resistance 200 Ohms - 2M Ohms
Temperature Range -20°C - 1370°C
Max display 1999
Battery 9V, PP3
Dimensions 74 x 129 x 28mm
Weight 100g
Order Code: ST600038 Price: £12.99
|
|
|
|
 |
Multimeter
with Datalogger
This professional multimeter has a very comprehensive
range of functions covering Current, Voltage, Resistance,
Capacitance, Frequency and Temperature. It also has an
RS232 connection to your PC and comes complete with software
so you can use it as a data logger and record your readings
over time for later analysis.
Auto-ranging or Manual setting
Display with Bar Graph and Backlight
True RMS reading
Specification
DCV: 400mV - 1000V
ACV: 4V- 750V
DCA: 400uA - 20A
ACA: 400uA - 20A
Resistance: 400 Ohms - 40MOhms
Capacitance: 4nF - 40mF
Frequency: 4kHz - 400MHz
Temperature: -40 - +1000 deg C
Temperature: -40 - +1832 deg F
Other features include Diode Test, Continuity Test, Data
Hold button, Low battery display, Max/Min reading, Auto
Power Off.
Battery: 9V PP3
Weight: 576g
Dimensions: 105 x 200 x 50mm
Screen Size: 60 x 34mm
Order Code: ST600109 Price: £96.00 |
|
|
|
|
Digital Clamp Meter
DC Volts 1V-1000V AC Volts 1V-750V AC current 0.1A-1000A resistance
200R-2000MR.
Order Code: ST600616 Price: £19.99
|
|
|
|
Digital Multimeter in own case
A digital multimeter with hinged lid which protects
the controls and display. Features built in test probe
leads. 3.1/2 digital LCD display, internal protection
fuse as well as transistor, continuity and diode checking
capability. Auto power-off when lid closed. Built-in
60Hz signal injector. DC Voltage: 2000m V to 450V +/-(
.8%+1), Resistance: 2000ohm to 2000Kohn +/- (1%+3).
AC Voltage:200V to 450V +/-(1.5%+10). DC Current:200mA
+/-(2%+2). Square wave O/P: 60Hz @4V p-p, Audible continuity
checker, Diode and Transistor Hfe tester, Dimensions:139
x 75 x 26mm.
Order Code: Q2434 Price: £12.99
|
|
|
| ANEMOMETERS |
| If
you want to know the wind speed these hand held anemometers
will give an instant reading and store the maximum speed
reached. Small and lightweight these devices are ideal
for many outdoor sports such as Sailing, Hiking, Archery,
and kite flying as well as many other practical activities. |
|
|
Xplorer
1 Hand Held Anemometer
Instant windspeed measurement with 'max' speed reached
displayed on the backlit LCD screen.
- Wind speed measured in km/h, mph, m/s, fps and knots.
- 2 readings per second
- From 0 to 150 km/h
- Accuracy : +/- 3%
- Dimensions: 41 x 93 x 17mm
- Weight 50g
Order Code: TG0012 Price: £29.95 |
|
|
Xplorer 3 Anemometer/Thermometer/Compass
As well as wind speed this model also monitors the wind
chill factor. It even includes an electronic compass for
even more functionallity.
- Wind speed measured in km/h, mph, m/s, fps and knots.
- 2 readings per second.
- From 0 to 150 km/h - Accuracy: +/- 3%
- Temperature displayed in Centergrade and Farenheight.
- 2 Readings per second.
- From -50 to +100 degrees C - Accuracy: +/- 0.3% C
- Compass displays in degrees - Accuracy: +/- 4 degrees
- Dimensions: 41 x 93 x 17mm
- Weight: 50g
Order Code: TG0013 Price: £59.95 |
|
|
|
|
|
|
|
|
Barometer
Model BAA898HG
Barometer with easy to read weather forcasting symbols. Features
are: Current barometric pressure reading (hPa), measures indoor
and outdoor temperature and humidity, takes up to three remote
sensors (1 included), temperature and humidity trend indicators,
comfort level indicators, Min/Max temperature and humidity
memory, clock with calendar and alarm with snooze, frost alarm
and backlight.
Order Code: HLL1118 Price: £79.99
|
|
|
Barometer Model BAA938HG
Barometer with animated, easy to read weather forecasting
symbols. Features are: Current barometric pressure reading
(hPa) and history bar graph, Measures Indoor/outdoor temperature
and humidity, Takes up to three remote sensors (1 included),
Temperature and humidity trend indicators, Comfort level indicators,
Animated moonphase and seasonal tide display, Clock with alarm
and calendar, Frost alarm and HiGlo backlight.
Order Code: HLL1120 Price: £99.99
|
|
|
Weather
Forecaster Model BAR113
Features are: Radio-linked to Rugby time signal for accuracy
and automatic time correction for BST, Cable free sensor,
Weather forecasting information display, Inside/outside temperature
display, Stores min/max temperature, Calendar clock with crescendo
alarm function.
Order Code: HLL1121 Price: £39.99
|
|
|
